Skip to content
Same-day and next-day appointments in most areas.
Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by Thermador.
Call (844) 771-7353
Error Code

Thermador Tumble Dryer F01 Error Code

F01 on a Thermador tumble dryer is generally linked to a possible control-electronics problem. This guide gives a plain-language overview, the symptoms you might notice, safe checks you can perform, and when it is best to call a technician — with a reminder that exact behavior varies by model.

Book a Repair (844) 771-7353

Reviewed by Marcus Cole · Last reviewed August 1, 2026

Error guide

Code overview

Marcus Cole Written by Marcus Cole Appliance Repair Content Specialist Published August 1, 2026 Updated August 12, 2026 Technically reviewed August 1, 2026

Content status: Verified

Error code F01
Appliance Tumble Dryer
Tumble Dryer service reference
Quick answer

F01 — commonly associated with an electronics issue on a Thermador tumble dryer. Meaning can vary by model; verify before relying on it.

Model compatibility: Thermador reuses codes across series and model years, so F01 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

On many Thermador tumble dryer models, the F01 code is commonly associated with a possible control-electronics problem. The exact meaning can differ between appliance series and model years, so treat this as general guidance and confirm it against your specific model’s documentation before acting.

Signs

Symptoms you may notice

The tumble dryer shows F01 and controls act erratically

F01 appears at power-on

Programs won’t start reliably with F01

Why it happens

Possible causes

A control-board fault

A power or wiring irregularity

A firmware or electronics glitch

Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

Confirm stable power at the outlet

Perform a manufacturer-approved restart once

Record the full model number

Record the full model number before contacting a technician

Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.

Please avoid

What not to attempt

  • Do not open internal panels or access high-voltage components
  • Do not bypass door locks, safety switches or interlocks
  • Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks
Get help

When to call a technician

If F01 persists after the safe checks above, or you are unsure at any point, book a diagnosis. A technician can confirm what F01 means on your specific model and resolve the underlying cause safely.

Likely related component: Often related to the control board (varies by model).

FAQ

Frequently asked questions

References

Sources & references

  • Thermador appliance user manual — error/display messages section
Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address 1200 Brickell Ave, Suite 400, Miami, FL 33131
Phone (844) 771-7353
Email service@example.com
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Pick a time that works — we’ll confirm your appointment.

Call Book a Repair